Customer Testimonials

PROJECT FILE

Derek and Sue Redgwell had originally intended to buy their self build conservatory from one of the big DIY stores but the standard sizes and minimal specification available did not suit their requirements so we designed a bespoke conservatory solution for them.

They chose an Instabuild steel base for a faster installation and the cad drawing below was approved by them prior to manufacture and delivery. The conservatory faces north and was supplied with an Ultraframe roof glazed with 35mm opal polycarbonate and our exceptional 1.2 U value Triple Shield argon filled sealed units provide the glazing to the full height windows and French door to ensure that their underfloor heating maintains a comfortable climate during the colder months of the year.

The following images have been provided by the customer and follow each stage of the conservatory installation from start to finish.

The conservatory location

Patio slabs removed and 450mm cube concrete pads constructed to the plan.

The steel base fixed to the rear of the house and the feet adjusted to level the base.

The factory made brick skirt is fixed to the base and the welded cill is fixed into position.

Windows, bay poles and door fixed in position ready for the roof to be installed.

The conservatory roof is fitted.

Conservatory roof installed and ready for glazing. Note that the door leaves have been removed to avoid any possibility of damage during construction.

Roof has now been glazed, the door leaves re-fitted and the windows and doors glazed.

External view of the finished conservatory.

Internal view.